DIY spot repair and minor body and paint
#21
Originally posted by iTaLiAn_vIrUs
hmm fair enough
i guess i have to take my time when doing it...
but after applying that
whats a good filler for the small infractions the fiberglass leaves
other than the putty
or does that work best in terms of that?
hmm fair enough
i guess i have to take my time when doing it...
but after applying that
whats a good filler for the small infractions the fiberglass leaves
other than the putty
or does that work best in terms of that?
Use a lighter filler, not the regular **** CT sells but when you mix it up its much more liquidy. It also hardens very smooth. Again the ct bondo can be very good if you use a nice clean spreader. and if need be just mix up alittle once its sanded and put it in the pin holes left over.
#23
dont forget to push out the dents before applying filler if there big enough. you dont want a big mound of plastic on your quarter.
and dont apply filler in small areas, if you do this you will end up with a high spot. cover a large area or larger then the dent is at least. i dont know how you used primer to bring the surface level back up.. that must of taken so much time when you could have just used filler.
applying filler is kinda hard and you need the right tools to make it straight.
and dont apply filler in small areas, if you do this you will end up with a high spot. cover a large area or larger then the dent is at least. i dont know how you used primer to bring the surface level back up.. that must of taken so much time when you could have just used filler.
applying filler is kinda hard and you need the right tools to make it straight.
#26
i just decided to redo my rear quarters im goin to buy the patch panel though. what do you guys recomend fibreglass filler, fibre glass resin or bondo? i have only used fibreglass resin before with ok results
Thread
Thread Starter
Forum
Replies
Last Post
wkarl
Custom Honda Civic Exterior - Lighting
1
08-Sep-2011 10:05 PM
imported_jj2ii3344
Civic DIY Tutorials - Info
1
13-Sep-2007 02:06 PM