DIY: short shifter installation
 

anybody have a guide of some sort to help me out?
i don't feel like paying to have it installed
:swords:

lol did you scroll down the DIY list? lol it was like a few listings from the top...anyway, here's the link to an H-T thread on how to install a BnM short shifter

http://honda-tech.com/zerothread?id=1007935

I would advise doing this if you plan on upgrading your exhaust or anything.. It is a whole lot easier to do while the exhaust is out of the way.

If your looking to do it on an Integra www.team-integra.com has a REALLY good guide on how to do it.

Its just a shifter... even with the exhaust there... just drop the hanger and its easy!

geoch is right... if u can get under the car enough... drop one of the hangers.... your short throw might rub a bit on your exhaust

how long does installing one of these puppies take? I bought one like 2 months ago but didnt get around to installing it :s

I just did mine. Not hard. Installation can be at fast as 30 minutes, if the short shifter can clear the exhaust pipe.

helped my buddy a couple days ago. piece of cake. 25min

Alright, thats awesome, thanks! I'll definitely free some time up this week. i'm so lazy :( can i use different grease or does it need to be that White Lithium grease?

Silicon grease will do, the type used for suspension bushing.

perrrrrfect. thanks man! But i'm assuming white lithium grease is better so if i can get my hands on that i'll go along with it.

thx again!