DIY How to fix cracks & bumps & also prime
20 Attachment(s)
Hey guys, this tutorial are for those like myself, who like to do things themselves and don't mind saving money here and there.
Throughout the years my civic had taken a few bumps and scratches, Ive been rear ended as you'll see from pics and Ive also hit someones trailer hitch when some douche decided to J-walk, I took it to an auto repair near by because my hood wouldnt close, he fixed that but put small dimple in the hood when trying to pop it out. Anyhow the reason for the black bumper would be 2 Christmas's back on my way to work, A dog got lose and ran across the street, Unfortunately I hit it and well... there went the bumper, along with my fist size dent in my fender. Enjoy. First things first, here are a few pics from before, All white looking marks are rough sanding with an 80 GRIT paper: Attachment 32341 Attachment 32342 Attachment 32343 Attachment 32344 Attachment 32345 Here's a Photo of Most products used I also suggest you do must of this in a dust free environment (as dust free as possible) ie Garage Attachment 32346 Attachment 32347 For fixing the crack in rear bumper I used Bondo's Body Repair Kit with fiber glass to ensure strength on the inside, on the outside I used the Bondo by itself along with Bondo's Glazing Putty to smooth things out. Innovation was needed to hold the bumper together while applying product. Attachment 32348 Attachment 32349 After the body repair, I sanded the area down with 80 Grit paper, then featherwighted it with 180, once pleased with genaral contouring I went back over it with a 400 Grit. Attachment 32350 Attachment 32351 Attachment 32352 Attachment 32353 Attachment 32354 Before priming, I wet sanded with the 400 Grit paper as well... primer was DUPLICOLOR Sandable spray paint/primer. I masked off most of the car by pulling in only partly into the garage, sealing off all external elements with plastic (from dollar store), and obviously news paper was used where needed. Attachment 32355 Attachment 32356 Attachment 32357 Attachment 32358 Attachment 32359 Attachment 32360 After these photos I once again wet sanded with 400 grit, word of advice, close your eyes while feeling your vehicle for any imperfections, if you do this correctly you should be able to run your hand across your vehicle not even noticing where the primer was applied. Photos of Finished painted product will be uploaded once I've received and applied the product. Thanks, D If there is anything you want to know or maybe Ive simply forgotten a step and youve noticed please feel free to let me know. |
Did you hammer out the dent in the fender, or did you just fill it in with bondo?
|
I hammered it out a bit to the best of my abilities via lifting the hood and placing a screwdriver with cloth rapped around the edge, then hammering gently. With the dents on the hood, I aslo hammered those DOWN a bit.
|
All times are GMT -4. The time now is 03:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands