imported_98hatch

I Purchaced a set of Square Fogs Off Ebay, Very Good quality and The Wiring harness was perfect. Everything was plug and play. The pics posted of the PJDM set is EXACTY what came w/ my set. I will Post some pics in a week or so because i have just purchaced some Yellow Lamin-x to place on my Fogs.

So to answer this Question there is cutting involved on the 96-98 bumper.

I'll do the whole Installation for you guys and show all the Plugs for the install since my teachers are on strike and i have nothing better to do!

Si98

i finally installed my fogs and everything works except for the ON/OFF feature on the switch. my fogs and the orange light on the switch would light up only when the switch is pressed but when i let go everything goes off. everything is oem in my setup except for the lamps and relay. what could be the problem?

imported_98hatch

So Basically Your fogs are only on when you press and hold the folight switch?

Once you let go, and nothing is holding the switch down they dont work???

thats weird **** man!

Si98

yup, very weird!

imported_masalma

sorry to bring back an oooooooooooooold topic, but i had my foglights on a 2000 civic installed for like 3 years, but during that time i have manage to crack both glass covers anyone knows how they can be replaced. if any place just sells the glass part, because i don't want to go out and buy a whole new kit just for those two little peices.

thanx in advance

Nas

imported_xplizitremix

how did u crack them? rocks?
or you just hit them

i was wondering if OEM fogs crack easy from debris on highways etc

kwasley

pm rdub99, he can sell you the bezel and glass.

93civich/b

can anyone help me out with my 01 civic fog install I dont have the template to cut the bumper

szuberi

^^ look at the back of the bumper where the fogs go...there should be markings there

imported_kIeRaN

you bet they do, ive seen some cars come into the dealer for their first oil changes with a broken foglight already