What do you think??
#1
What do you think??
So I was just finished my DIY projects and wanted to post them so here they are and let me know what you think.
1.) Painted the nasty chrome trim with Krylon saint black.
2.)Made my own cargo cover with a light grey vinyl and clips from an EF.
3.) 1/2" MDF and Elmer's spray adhesive made this spare tire area nice and flat, I used the carpet as a template on the MDF.
4.) A side view of the MDF lifted.
5.) A little loop handle I made from a black duffel bag. I screwed it on the bottom side of the MDF.
6.) My brand new system installed. A custom box made by Selective Sound, 8" MA Audio (ma83xe) and Orin cobalt ( co500.1) perfectly matched at 250watts rms @ 2 ohms 500 max.
I drilled a 5/8" hole under the amp with 1/4" spacers on all four corners then I ran the wires through the bottom of the MDF and around the amp for a clean look. I also bolted down my sub box.
7.) What the amp looks like at night!.
That's all for now.lol Thanks for looking
1.) Painted the nasty chrome trim with Krylon saint black.
2.)Made my own cargo cover with a light grey vinyl and clips from an EF.
3.) 1/2" MDF and Elmer's spray adhesive made this spare tire area nice and flat, I used the carpet as a template on the MDF.
4.) A side view of the MDF lifted.
5.) A little loop handle I made from a black duffel bag. I screwed it on the bottom side of the MDF.
6.) My brand new system installed. A custom box made by Selective Sound, 8" MA Audio (ma83xe) and Orin cobalt ( co500.1) perfectly matched at 250watts rms @ 2 ohms 500 max.
I drilled a 5/8" hole under the amp with 1/4" spacers on all four corners then I ran the wires through the bottom of the MDF and around the amp for a clean look. I also bolted down my sub box.
7.) What the amp looks like at night!.
That's all for now.lol Thanks for looking
#6
Its the stock carpet I just took it out and hand washed it in my bathtub, but if yours is to damaged you can get some from fabricland.
I got the spray from CT, you can use elmer's or 3M adhesive spray.
I got the spray from CT, you can use elmer's or 3M adhesive spray.
Thread
Thread Starter
Forum
Replies
Last Post
ton1c
Media - Non-Car Related
3
16-Sep-2011 02:35 PM
viper_2_4
Chit-Chat
18
12-Dec-2007 01:55 PM
imported_Torrey
Honda Civic Performance - JDM Discussion
19
13-Mar-2004 12:44 AM