CFz Discussion Club discussions, Civic talk, and general automotive info not covered by a sub-forum.

LSD junkyard find

Thread Tools
 
Search this Thread
 
Old 17-Mar-2014, 09:17 AM
  #1  
Junior Member
Thread Starter
 
2 KIGB's Avatar
 
Join Date: Feb 2014
Location: So.Cal USA
Posts: 19
LSD junkyard find

Hey guys. It was half off at the local junkyard(Disneyland)yesterday and I found this s-20 LSD for $80. Anyone know what it is. Thanks
Attached Thumbnails LSD junkyard find-img_20140316_231134_286_zpstwhyhip3.jpg   LSD junkyard find-img_20140317_054416_330_zps3hzvvvhv.jpg  
2 KIGB is offline  
Old 18-Mar-2014, 04:44 AM
  #2  
Junior Member
Thread Starter
 
2 KIGB's Avatar
 
Join Date: Feb 2014
Location: So.Cal USA
Posts: 19
Its crap
2 KIGB is offline  
Old 18-Mar-2014, 03:20 PM
  #3  
-- site donator --
iTrader: (2)
 
ol Dusty's Avatar
 
Join Date: Mar 2006
Location: In my car
Posts: 1,570
why's it crap? I thintk that's a d series Si trans with LSD, well more likely a VTi trans but still.

What's wrong with it? at the very least is the diff good? easy enough to pull the ring gear off and swap into another D series box
ol Dusty is offline  
Old 18-Mar-2014, 03:38 PM
  #4  
Junior Member
Thread Starter
 
2 KIGB's Avatar
 
Join Date: Feb 2014
Location: So.Cal USA
Posts: 19
Thumbs up

Originally Posted by ol Dusty
why's it crap? I thintk that's a d series Si trans with LSD, well more likely a VTi trans but still.

What's wrong with it? at the very least is the diff good? easy enough to pull the ring gear off and swap into another D series box
Yeah I believe its a vti as well. Nothing is wrong with it at all its just has the .750 5th gear. I'm not well versed on all the lsd's but I'm told these factory one's are good for about 50k miles. I thought I had found the gold mine there for a minute. I'm getting ready to put it in to see how she feels. I thought I read somewhere that this diff has its own bolt pattern there for no chance of a switch. I have to look into.
2 KIGB is offline  
Old 19-Mar-2014, 02:55 PM
  #5  
-- site donator --
iTrader: (2)
 
ol Dusty's Avatar
 
Join Date: Mar 2006
Location: In my car
Posts: 1,570
Should be the same, if not swap the ring and pinon over. Some factory LSD's from Honda are metal plate and need to be rebuilt, but once the diffs out, its simply replacing a few plates like a motor cycle clutch pack. Not a novice job, but easier then properly closing a trans. Most are helical gear type tho and require no maintenance other then of course changing the fluid now and then no different then a regular open diff. With these it's the same as an open diff, either it works or it doesn't. The metal plate works better when new, then when the LSD function wears out, it operates just like an open diff. The test for it's effectiveness is done with everything installed still, but you could probably rig something similar to what I'm about to describe if you have extra axles laying around or pull yours out and use them to test it before you bother dropping the trans. Basically with one wheel on the ground, the other off use a 32mm socket on the axle nut, and turn in a tightening direction with a torque wrench. It should take more then 35lb/ft I think before the wheel in the air spins.
ol Dusty is offline  
Old 23-Mar-2014, 03:50 AM
  #6  
Junior Member
Thread Starter
 
2 KIGB's Avatar
 
Join Date: Feb 2014
Location: So.Cal USA
Posts: 19
Thumbs up

Originally Posted by ol Dusty
Should be the same, if not swap the ring and pinon over. Some factory LSD's from Honda are metal plate and need to be rebuilt, but once the diffs out, its simply replacing a few plates like a motor cycle clutch pack. Not a novice job, but easier then properly closing a trans. Most are helical gear type tho and require no maintenance other then of course changing the fluid now and then no different then a regular open diff. With these it's the same as an open diff, either it works or it doesn't. The metal plate works better when new, then when the LSD function wears out, it operates just like an open diff. The test for it's effectiveness is done with everything installed still, but you could probably rig something similar to what I'm about to describe if you have extra axles laying around or pull yours out and use them to test it before you bother dropping the trans. Basically with one wheel on the ground, the other off use a 32mm socket on the axle nut, and turn in a tightening direction with a torque wrench. It should take more then 35lb/ft I think before the wheel in the air spins.
Thanks for all the info. I used old axels and it tested great. I even dropped it in my car and runs beautifully. No burnout. I'm going to try and sell it and put some suspension on my poor car. People tell me I should get some good money out of it. I appreciate the help a lot. Its that kind of help that makes me return
2 KIGB is offline  
Old 23-Mar-2014, 01:02 PM
  #7  
-- site donator --
iTrader: (2)
 
ol Dusty's Avatar
 
Join Date: Mar 2006
Location: In my car
Posts: 1,570
I'd rather keep the LSD, but that's just me. D series LSD's are kinda rare so you can get ok money for them considering what you paid, tho the demand for D series parts isn't that high compared to B/H/K so if you sell be patient.
ol Dusty is offline  
Old 24-Mar-2014, 03:56 AM
  #8  
Junior Member
Thread Starter
 
2 KIGB's Avatar
 
Join Date: Feb 2014
Location: So.Cal USA
Posts: 19
Well hell. Patience isn't one of my strong points that's for sure. confused
2 KIGB is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
k_r_a_c_k_e_r
CFz Discussion
15
01-Nov-2011 11:26 PM
666
CFz Discussion
8
25-Aug-2003 10:26 PM
johnny23toronto
Custom Honda Civic Exterior - Lighting
8
07-Jul-2003 06:50 PM
imported_Hybridtheory
Chit-Chat
17
03-Apr-2003 07:41 PM
imported_bigDrew
Custom Honda Civic Exterior - Lighting
10
21-Aug-2002 08:53 AM



Quick Reply: LSD junkyard find



All times are GMT -4. The time now is 08:45 AM.