nemo1

iTrader: (1)

im trying to bolt up my turbo to the manifold but cant get at the last bolt, looks like i have to remove the compressor housing. now i havent done this before. do i just unbolt the housing and bolt it back up when im done...is there any alignment issues i should watch? its a gt37r


thanks

MPR

Yep. Should be a bunch of 10mm bolts. It may take a couple light taps with a rubber mallet to crack the housing loose after the bolts are undone. Careful not to damage the compressor wheel and don't over-tighten the bolts when you reinstall the housing.

nemo1

iTrader: (1)

ok sounds good man thanks alot

megomaniac

1/2 inch on mine i think,

6 bolts, lose'n it and clock it